Product ID:07488 TITANIUM AMS4951 0.063 INCHES OD
MSDS Date:11/25/1985
FSC:3439
NIIN:00-994-5368
MSDS Number: BKYQS

ASTROLITE ALLOYS/DIV OF ASTRO METALLURGICAL

709 VIA ALONDRA
CAMARILLO, CA 93010-8714
US

Emergency Phone: (805) 484-3621

Info Phone: (805) 484-3621

Cage: 2R602

SUPRA ALLOYS INC CA 93010-8052

CAMARILLO, CA 93010-8714 US

Telephone: 805-484-3621

Cage: SUPRA

TITANIUM (DRY POWDER) (TI)

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 46-99%

ACGIH TLV: 10 MG/CUM TOTAL DUST

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 0-6%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

VANADIUM (SARA III)

CAS: 7440-62-2

RTECS: YW1355000

Fraction By Weight: 0-10%

OSHA PEL C,0.5 MG V2O5/M3 RD

ACGIH TLV: 0.05 MG V205/M3;9293

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0-48%

ACGIH TLV: 5 MG/CUM

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0-5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: 0-4%

OSHA PEL 5 MG/M3/10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0-5%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

TANTALUM

CAS: 7440-25-7

RTECS: WW5505000

Fraction By Weight: <1%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; DUST; 9192

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 2-6%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 2-2.5%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0.8%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION: METALLIC
TASTE IN MOUTH/DRYNESS/THROAT IRRITATION/INFLUENZA-LIKE
SYMPTOMS/METAL FUME FEVER. SKIN: HIGH CONCENTRATION OF DUST/FUMES
CAUSES SENSITIZATION DERMATITIS/TITANIU M DUST MAY CAUSE PHYSICAL
ABRASION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:INHALATION: INFLAMMATION & ULCERATION OF UPPER
RESPIRATORY TRACT & POSSIBLE CANCER OF NASAL PASSAGES & LUNGS.

First Aid:INHALATION: IF EXPOSED TO EXCESSIVE LEVELS OF METAL FUMES,
REMOVE TO FRESH AIR. TREAT AS A NUISANCE DUST. EYES/SKIN: FLUSH
W/WATER FOR AT LEAST 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Extinguishing Media:DRY CHEMICAL POWDERS, SALTS OR INERT GAS. DON'T USE
WATER OR LIQUID; EXPLOSION HAZARD COULD RESULT.
Fire Fighting Procedures:KEEP WORK AREAS FREE OF THE WASTE.
Unusual Fire/Explosion Hazard:PRODUCT DOESN'T BURN. HOWEVER,
GRINDING/POLISHING PRODUCT IN ABSENCE OF OXYGEN, SUCH AS UNDER
WATER CAN CAUSE A FINELY DIVIDED WASTE WHICH IS IGNITABLE.

Spill Release Procedures:USE NON-SPARKING METAL EQUIPMENT.

Handling and Storage Precautions:KEEP WORK AREAS FREE OF THE WASTE.
IGNITABLE WASTE: STORE WET, AWAY FROM HEAT/OPEN FLAME. MAINTAIN
HUMIDITY >50% TO PREVENT AN ELECTROSTATIC BUILD-UP.
Other Precautions:NO SMOKING IN AREA. METALLIC DUST OR FUMES MAY BE
PRODUCED DURING WELDING, BURNING, GRINDING & POSSIBLY MACHINING.
AVOID INHALATION OF PARTICULATES.

Respiratory Protection:NIOSH-MSHA APPROVED DUST/FUME, RESPIRATOR SHOULD
BE USED TO AVOID EXCESSIVE INHALATION OF PARTICULTES WHEN EXPOSURE
EXCEEDS TLV.
Ventilation:USE LOCAL EXHAUSE WHEN WELDING, BURNING, SAWING, BRAZING,
GRINDING OR MACHINING WHEN EXPOSURE EXCEEDS TLV.
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:PROTECTIVE EQUIPMENT SHOULD BE UTILIZED AS
REQUIRED BY WELDING STANDARDS.
Supplemental Safety and Health

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1560-1840C
Appearance and Odor:GRAY METALLIC SOLID; ODORLESS

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FOR IGNITABLE WASTE: HEAT, OPEN FLAME, &
HUMIDITY <50%
Hazardous Decomposition Products:METALLIC DUST OR FUMES, OXIDES FUMES
OF IRON, MANGANESE & COPPER

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.